From 8e61b98c5e2943b149c825310b24e714a6127072 Mon Sep 17 00:00:00 2001 From: Martin Lucina Date: Mon, 23 Jan 2012 08:53:41 +0100 Subject: Imported Upstream version 2.1.4 --- doc/zmq_inproc.html | 669 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 669 insertions(+) create mode 100644 doc/zmq_inproc.html (limited to 'doc/zmq_inproc.html') diff --git a/doc/zmq_inproc.html b/doc/zmq_inproc.html new file mode 100644 index 0000000..6bc6959 --- /dev/null +++ b/doc/zmq_inproc.html @@ -0,0 +1,669 @@ + + + + + +zmq_inproc(7) + + + + + +
+

SYNOPSIS

+
+

The in-process transport passes messages via memory directly between threads +sharing a single ØMQ context.

+
+ + + +
+
Note
+
No I/O threads are involved in passing messages using the inproc +transport. Therefore, if you are using a ØMQ context for in-process messaging +only you can initialise the context with zero I/O threads. See +zmq_init(3) for details.
+
+
+

ADDRESSING

+
+

A ØMQ address string consists of two parts as follows: +transport://endpoint. The transport part specifies the underlying +transport protocol to use, and for the in-process transport shall be set to +inproc. The meaning of the endpoint part for the in-process transport is +defined below.

+

Assigning a local address to a socket

+

When assigning a local address to a socket using zmq_bind() with the +inproc transport, the endpoint shall be interpreted as an arbitrary string +identifying the name to create. The name must be unique within the ØMQ +context associated with the socket and may be up to 256 characters in +length. No other restrictions are placed on the format of the name.

+

Connecting a socket

+

When connecting a socket to a peer address using zmq_connect() with the +inproc transport, the endpoint shall be interpreted as an arbitrary string +identifying the name to connect to. The name must have been previously +created by assigning it to at least one socket within the same ØMQ context +as the socket being connected.

+
+

WIRE FORMAT

+
+

Not applicable.

+
+

EXAMPLES

+
+
+
Assigning a local address to a socket
+
+
/* Assign the in-process name "#1" */
+rc = zmq_bind(socket, "inproc://#1");
+assert (rc == 0);
+/* Assign the in-process name "my-endpoint" */
+rc = zmq_bind(socket, "inproc://my-endpoint");
+assert (rc == 0);
+
+
+
Connecting a socket
+
+
/* Connect to the in-process name "#1" */
+rc = zmq_connect(socket, "inproc://#1");
+assert (rc == 0);
+/* Connect to the in-process name "my-endpoint" */
+rc = zmq_connect(socket, "inproc://my-endpoint");
+assert (rc == 0);
+
+
+

SEE ALSO

+ +

AUTHORS

+
+

This ØMQ manual page was written by Martin Sustrik <sustrik@250bpm.com> and +Martin Lucina <mato@kotelna.sk>.

+
+
+

+ + + -- cgit v1.2.3