Convert documentation to AsciiDoc

20 files changed, 0 insertions, 996 deletions

diff --git a/man/man3/zmq_bind.3 b/man/man3/zmq_bind.3
deleted file mode 100644
index 61d97fa..0000000
--- a/man/man3/zmq_bind.3
+++ /dev/null
@@ -1,52 +0,0 @@
-.TH zmq_bind 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_bind \- binds the socket to the specified address
-.SH SYNOPSIS
-.B int zmq_bind (void *s, const char *addr);
-.SH DESCRIPTION
-The function binds socket
-.IR s
-to a particular transport. Actual semantics of the 
-command depend on the underlying transport mechanism, however, in cases where
-peers connect in an asymmetric manner,
-.IR zmq_bind
-should be called first,
-.IR zmq_connect
-afterwards. Actual formats of
-.IR addr
-parameter are defined by individual transports. For a list of supported
-transports have a look at
-.IR zmq(7)
-manual page.
-
-Note that single socket can be bound (and connected) to
-arbitrary number of peers using different transport mechanisms.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-.IP "\fBEPROTONOSUPPORT\fP"
-unsupported protocol.
-.IP "\fBENOCOMPATPROTO\fP"
-protocol is not compatible with the socket type.
-.IP "\fBEADDRINUSE\fP"
-the given address is already in use.
-.IP "\fBEADDRNOTAVAIL\fP"
-a nonexistent interface was requested or the requested address was not local.
-.SH EXAMPLE
-.nf
-void *s = zmq_socket (context, ZMQ_PUB);
-assert (s);
-int rc = zmq_bind (s, "inproc://my_publisher");
-assert (rc == 0);
-rc = zmq_bind (s, "tcp://eth0:5555");
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_connect (3)
-.BR zmq_socket (3)
-.BR zmq (7)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_close.3 b/man/man3/zmq_close.3
deleted file mode 100644
index ad731d3..0000000
--- a/man/man3/zmq_close.3
+++ /dev/null
@@ -1,30 +0,0 @@
-.TH zmq_close 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_close \- destroys 0MQ socket
-.SH SYNOPSIS
-.B int zmq_close (void *s);
-.SH DESCRIPTION
-Destroys 0MQ socket (one created using
-.IR zmq_socket
-function). All sockets have to be properly closed before the application
-terminates, otherwise memory leaks will occur. Note that any outbound messages
-that haven't been psuhed to the network yet and any inbound messages that
-haven't been received by the application yet will be dropped on the socket
-shutdown.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-int rc = zmq_close (s);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_socket (3)
-.BR zmq_term (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_connect.3 b/man/man3/zmq_connect.3
deleted file mode 100644
index 925b66e..0000000
--- a/man/man3/zmq_connect.3
+++ /dev/null
@@ -1,49 +0,0 @@
-.TH zmq_connect 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_connect \- connect the socket to the specified peer
-.SH SYNOPSIS
-.B int zmq_connect (void *s, const char *addr);
-.SH DESCRIPTION
-The function connect socket
-.IR s
-to the peer identified by
-.IR addr .
-Actual semantics of the  command depend on the underlying transport mechanism,
-however, in cases where peers connect in an asymmetric manner,
-.IR zmq_bind
-should be called first,
-.IR zmq_connect
-afterwards. Formats of the
-.IR addr
-parameter are defined by individual transports. For a list of supported
-transports have a look at
-.IR zmq(7)
-manual page.
-
-Note that single socket can be connected (and bound) to
-arbitrary number of peers using different transport mechanisms.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-.IP "\fBEPROTONOSUPPORT\fP"
-unsupported protocol.
-.IP "\fBENOCOMPATPROTO\fP"
-protocol is not compatible with the socket type.
-.SH EXAMPLE
-.nf
-void *s = zmq_socket (context, ZMQ_SUB);
-assert (s);
-int rc = zmq_connect (s, "inproc://my_publisher");
-assert (rc == 0);
-rc = zmq_connect (s, "tcp://server001:5555");
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_bind (3)
-.BR zmq_socket (3)
-.BR zmq (7)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_flush.3 b/man/man3/zmq_flush.3
deleted file mode 100644
index eb2a719..0000000
--- a/man/man3/zmq_flush.3
+++ /dev/null
@@ -1,37 +0,0 @@
-.TH zmq_flush 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_flush \- flushes pre-sent messages to the socket
-.SH SYNOPSIS
-.B int zmq_flush (void *s);
-.SH DESCRIPTION
-Flushes all the pre-sent messages - i.e. those that have been sent with
-ZMQ_NOFLUSH flag - to the socket. This functionality improves performance in
-cases where several messages are sent during a single business operation.
-It should not be used as a transaction - ACID properties are not guaranteed.
-Note that calling
-.IR zmq_send
-without ZMQ_NOFLUSH flag automatically flushes all previously pre-sent messages.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-.IP "\fBENOTSUP\fP"
-function isn't supported by particular socket type.
-.IP "\fBEFSM\fP"
-function cannot be called at the moment, because socket is not in the
-approprite state.
-.SH EXAMPLE
-.nf
-rc = zmq_send (s, &msg1, ZMQ_NOFLUSH);
-assert (rc == 0);
-rc = zmq_send (s, &msg2, ZMQ_NOFLUSH);
-assert (rc == 0);
-rc = zmq_flush (s);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_send (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_init.3 b/man/man3/zmq_init.3
deleted file mode 100644
index 6b5e75f..0000000
--- a/man/man3/zmq_init.3
+++ /dev/null
@@ -1,40 +0,0 @@
-.TH zmq_init 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_init \- initialises 0MQ context
-.SH SYNOPSIS
-.B void *zmq_init (int app_threads, int io_threads, int flags);
-.SH DESCRIPTION
-Initialises 0MQ context. 
-.IR app_threads
-specifies maximal number of application threads that can own open sockets
-at the same time. At least one application thread should be defined.
-.IR io_threads
-specifies the size of thread pool to handle I/O operations. The value shouldn't
-be negative. Zero can be used in case only in-process messaging is going to be
-used, i.e. there will be no I/O traffic.
-
-.IR flags 
-argument is a combination of the flags defined below:
-.IP "\fBZMQ_POLL\fP"
-flag specifying that the sockets within this context should be pollable (see
-.IR zmq_poll
-). Pollable sockets may add a little latency to the message transfer when
-compared to non-pollable sockets.
-
-.SH RETURN VALUE
-Function returns context handle is successful. Otherwise it returns NULL and
-sets errno to one of the values below.
-.SH ERRORS
-.IP "\fBEINVAL\fP"
-there's less than one application thread allocated, or number of I/O threads
-is negative.
-.SH EXAMPLE
-.nf
-void *ctx = zmq_init (1, 1, ZMQ_POLL);
-assert (ctx);
-.fi
-.SH SEE ALSO
-.BR zmq_term (3)
-.BR zmq_socket (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_msg_close.3 b/man/man3/zmq_msg_close.3
deleted file mode 100644
index e601ea2..0000000
--- a/man/man3/zmq_msg_close.3
+++ /dev/null
@@ -1,32 +0,0 @@
-.TH zmq_msg_close 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_msg_close \- destroys 0MQ message
-.SH SYNOPSIS
-.B int zmq_msg_close (zmq_msg_t *msg);
-.SH DESCRIPTION
-Deallocates message
-.IR msg
-including any associated buffers (unless the buffer is
-shared with another message). Not calling this function can result in
-memory leaks.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-zmq_msg_t msg;
-rc = zmq_msg_init_size (&msg, 1000000);
-assert (rc = 0);
-rc = zmq_msg_close (&msg);
-assert (rc = 0);
-.fi
-.SH SEE ALSO
-.BR zmq_msg_init (3)
-.BR zmq_msg_init_size (3)
-.BR zmq_msg_init_data (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_msg_copy.3 b/man/man3/zmq_msg_copy.3
deleted file mode 100644
index acb8389..0000000
--- a/man/man3/zmq_msg_copy.3
+++ /dev/null
@@ -1,43 +0,0 @@
-.TH zmq_msg_copy 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_msg_copy \- copies content of a message to another message
-.SH SYNOPSIS
-.B int zmq_msg_copy (zmq_msg_t *dest, zmq_msg_t *src);
-.SH DESCRIPTION
-Copy the
-.IR src
-message to
-.IR dest .
-The original content of
-.IR dest
-is orderly deallocated.
-Caution: The implementation may choose not to physically copy the data, rather
-to share the buffer between two messages. Thus avoid modifying message data
-after the message was copied. Doing so can modify multiple message instances.
-If what you need is actual hard copy, allocate new message using
-.IR zmq_msg_size
-and copy the data using
-.IR memcpy .
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-zmq_msg_t dest;
-rc = zmq_msg_init (&dest);
-assert (rc == 0);
-rc = zmq_msg_copy (&dest, &src);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_msg_move (3)
-.BR zmq_msg_init (3)
-.BR zmq_msg_init_size (3)
-.BR zmq_msg_init_data (3)
-.BR zmq_msg_close (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_msg_data.3 b/man/man3/zmq_msg_data.3
deleted file mode 100644
index ef3cba8..0000000
--- a/man/man3/zmq_msg_data.3
+++ /dev/null
@@ -1,27 +0,0 @@
-.TH zmq_msg_data 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_msg_data \- retrieves pointer to the message content
-.SH SYNOPSIS
-.B void *zmq_msg_data (zmq_msg_t *msg);
-.SH DESCRIPTION
-Returns pointer to message data. Always use this function to access the data,
-never use
-.IR zmq_msg_t
-members directly.
-.SH RETURN VALUE
-Pointer to the message data.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-zmq_msg_t msg;
-rc = zmq_msg_init_size (&msg, 100);
-memset (zmq_msg_data (&msg), 0, 100);
-.fi
-.SH SEE ALSO
-.BR zmq_msg_init (3)
-.BR zmq_msg_init_size (3)
-.BR zmq_msg_init_data (3)
-.BR zmq_msg_close (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_msg_init.3 b/man/man3/zmq_msg_init.3
deleted file mode 100644
index 80d51d2..0000000
--- a/man/man3/zmq_msg_init.3
+++ /dev/null
@@ -1,33 +0,0 @@
-.TH zmq_msg_init 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_msg_init \- initialises empty 0MQ message
-.SH SYNOPSIS
-.B int zmq_msg_init (zmq_msg_t *msg);
-.SH DESCRIPTION
-Initialises 0MQ message zero bytes long. The function is most useful
-to initialise a
-.IR zmq_msg_t
-structure before receiving a message.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-zmq_msg_t msg;
-rc = zmq_msg_init (&msg);
-assert (rc == 0);
-rc = zmq_recv (s, &msg, 0);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_msg_close (3)
-.BR zmq_msg_init_size (3)
-.BR zmq_msg_init_data (3)
-.BR zmq_msg_data (3)
-.BR zmq_msg_size (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_msg_init_data.3 b/man/man3/zmq_msg_init_data.3
deleted file mode 100644
index 0af95be..0000000
--- a/man/man3/zmq_msg_init_data.3
+++ /dev/null
@@ -1,55 +0,0 @@
-.TH zmq_msg_init_data 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_msg_init \- initialises 0MQ message from the given data
-.SH SYNOPSIS
-.nf
-.B typedef void (zmq_free_fn) (void *data, void *hint);
-.B int zmq_msg_init_data (zmq_msg_t *msg, void *data, size_t size, zmq_free_fn *ffn, void *hint);
-.fi
-.SH DESCRIPTION
-Initialise a message from a supplied buffer. Message isn't copied,
-instead 0MQ infrastructure takes ownership of the buffer located at address
-.IR data ,
-.IR size
-bytes long. 
-Deallocation function (
-.IR ffn
-) will be called once the data are not needed anymore. When using a static
-constant buffer,
-.IR ffn
-may be NULL to prevent subsequent deallocation. If needed, additional
-.IR hint
-can be passed to the initialisation function. It's an opaque pointer that will
-be later on passed to
-.IR ffn
-as a second argument.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-void my_free (void *data, void *hint) {free (data);}
-
-        ...
-
-void *data = malloc (6);
-assert (data);
-memcpy (data, "ABCDEF", 6);
-zmq_msg_t msg;
-rc = zmq_msg_init_data (&msg, data, 6, my_free, NULL);
-assert (rc == 0);
-rc = zmq_send (s, &msg, 0);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_msg_close (3)
-.BR zmq_msg_init (3)
-.BR zmq_msg_init_size (3)
-.BR zmq_msg_data (3)
-.BR zmq_msg_size (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_msg_init_size.3 b/man/man3/zmq_msg_init_size.3
deleted file mode 100644
index cc7a71e..0000000
--- a/man/man3/zmq_msg_init_size.3
+++ /dev/null
@@ -1,44 +0,0 @@
-.TH zmq_msg_init_size 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_msg_init \- initialises 0MQ message of a specified size
-.SH SYNOPSIS
-.B int zmq_msg_init_size (zmq_msg_t *msg, size_t size);
-.SH DESCRIPTION
-Initialises 0MQ message
-.IR size
-bytes long. The implementation chooses whether it is more efficient to store
-message content on the stack (small messages) or on the heap (large messages).
-Therefore, never access message data directly via
-.IR zmq_msg_t
-members, rather use
-.IR zmq_msg_data
-and
-.IR zmq_msg_size
-functions to get message data and size. Note that the message data are not
-nullified to avoid the associated performance impact. Thus you
-should expect your message to contain bogus data after this call.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-.IP "\fBENOMEM\fP"
-memory to hold the message cannot be allocated.
-.SH EXAMPLE
-.nf
-zmq_msg_t msg;
-rc = zmq_msg_init_size (&msg, 6);
-assert (rc == 0);
-memcpy (zmq_msg_data (&msg), "ABCDEF", 6);
-rc = zmq_send (s, &msg, 0);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_msg_close (3)
-.BR zmq_msg_init (3)
-.BR zmq_msg_init_data (3)
-.BR zmq_msg_data (3)
-.BR zmq_msg_size (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_msg_move.3 b/man/man3/zmq_msg_move.3
deleted file mode 100644
index 8663585..0000000
--- a/man/man3/zmq_msg_move.3
+++ /dev/null
@@ -1,38 +0,0 @@
-.TH zmq_msg_move 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_msg_move \- moves content of a message to another message
-.SH SYNOPSIS
-.B int zmq_msg_move (zmq_msg_t *dest, zmq_msg_t *src);
-.SH DESCRIPTION
-Move the content of the message from
-.IR src
-to
-.IR dest .
-The content isn't copied, just moved.
-.IR src
-becomes an empty message after the call. Original content of
-.IR dest
-message is deallocated.
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-zmq_msg_t dest;
-rc = zmq_msg_init (&dest);
-assert (rc == 0);
-rc = zmq_msg_move (&dest, &src);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_msg_copy (3)
-.BR zmq_msg_init (3)
-.BR zmq_msg_init_size (3)
-.BR zmq_msg_init_data (3)
-.BR zmq_msg_close (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_msg_size.3 b/man/man3/zmq_msg_size.3
deleted file mode 100644
index aa1f8b0..0000000
--- a/man/man3/zmq_msg_size.3
+++ /dev/null
@@ -1,30 +0,0 @@
-.TH zmq_msg_size 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_msg_size \- retrieves size of the message content
-.SH SYNOPSIS
-.B size_t zmq_msg_size (zmq_msg_t *msg);
-.SH DESCRIPTION
-Returns size of the message data. Always use this function to get the size,
-never use
-.IR zmq_msg_t
-members directly.
-.SH RETURN VALUE
-Size of the message data (bytes).
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-zmq_msg_t msg;
-rc = zmq_msg_init (&msg);
-assert (rc == 0);
-rc = zmq_recv (s, &msg, 0);
-assert (rc == 0);
-size_t msg_size = zmq_msg_size (&msg);
-.fi
-.SH SEE ALSO
-.BR zmq_msg_init (3)
-.BR zmq_msg_init_size (3)
-.BR zmq_msg_init_data (3)
-.BR zmq_msg_close (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_poll.3 b/man/man3/zmq_poll.3
deleted file mode 100644
index f70bf18..0000000
--- a/man/man3/zmq_poll.3
+++ /dev/null
@@ -1,71 +0,0 @@
-.TH zmq_poll 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_poll \- polls for events on a set of 0MQ and POSIX sockets
-.SH SYNOPSIS
-.B int zmq_poll (zmq_pollitem_t *items, int nitems, long timeout);
-.SH DESCRIPTION
-Waits for the events specified by 
-.IR items
-parameter. Number of items in the array is determined by
-.IR nitems
-argument. Each item in the array looks like this:
-
-.nf
-typedef struct
-{
-    void *socket;
-    int fd;
-    short events;
-    short revents;
-} zmq_pollitem_t;
-.fi
-
-0MQ socket to poll on is specified by
-.IR socket .
-In case you want to poll on standard POSIX socket, set
-.IR socket
-to NULL and fill the POSIX file descriptor to
-.IR fd .
-.IR events
-specifies which events to wait for. It's a combination of the values below.
-Once the call exits,
-.IR revent
-will be filled with events that have actually occured on the socket. The field
-will contain a combination of the values below.
-
-.IP "\fBZMQ_POLLIN\fP"
-poll for incoming messages.
-.IP "\fBZMQ_POLLOUT\fP"
-wait while message can be set socket. Poll will return if a message of at least
-one byte can be written to the socket. However, there is no guarantee that
-arbitrarily large message can be sent.
-
-.IR timeout
-argument specifies an upper limit on the time for which
-.IR zmq_poll
-will block, in microseconds. Specifying a negative value in timeout means
-an infinite timeout. 
-
-.SH RETURN VALUE
-Function returns number of items signaled or -1 in the case of error.
-.SH ERRORS
-.IP "\fBEFAULT\fP"
-there's a 0MQ socket in the pollset belonging to a different application thread.
-.IP "\fBENOTSUP\fP"
-0MQ context was initialised without ZMQ_POLL flag. I/O multiplexing is disabled.
-.SH EXAMPLE
-.nf
-zmq_pollitem_t items [2];
-items [0].socket = s;
-items [0].events = ZMQ_POLLIN;
-items [1].socket = NULL;
-items [1].fd = my_fd;
-items [1].events = ZMQ_POLLIN;
-
-int rc = zmq_poll (items, 2);
-assert (rc != -1);
-.fi
-.SH SEE ALSO
-.BR zmq_socket (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_recv.3 b/man/man3/zmq_recv.3
deleted file mode 100644
index 8a961bb..0000000
--- a/man/man3/zmq_recv.3
+++ /dev/null
@@ -1,52 +0,0 @@
-.TH zmq_recv 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_recv \- retrieves a message from the socket
-.SH SYNOPSIS
-.B int zmq_recv (void *s, zmq_msg_t *msg, int flags);
-.SH DESCRIPTION
-Receive a message from the socket
-.IR s ,
-store it in
-.IR msg .
-Any content previously in
-.IR msg
-will be properly deallocated.
-.IR flags
-argument can be combination of the flags described below.
-
-.IP "\fBZMQ_NOBLOCK\fP"
-The flag specifies that the operation should be performed in
-non-blocking mode. I.e. if it cannot be processed immediately,
-error should be returned with
-.IR errno
-set to EAGAIN.
-
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-.IP "\fBEAGAIN\fP"
-it's a non-blocking receive and there's no message available at the moment.
-.IP "\fBENOTSUP\fP"
-function isn't supported by particular socket type.
-.IP "\fBEFSM\fP"
-function cannot be called at the moment, because socket is not in the
-appropriate state. This error may occur with sockets that switch between
-several states (e.g. ZMQ_REQ).
-.SH EXAMPLE
-.nf
-zmq_msg_t msg;
-int rc = zmq_msg_init (&msg);
-assert (rc == 0);
-rc = zmq_recv (s, &msg, 0);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_send (3)
-.BR zmq_msg_init (3)
-.BR zmq_msg_data (3)
-.BR zmq_msg_size (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_send.3 b/man/man3/zmq_send.3
deleted file mode 100644
index c6644fc..0000000
--- a/man/man3/zmq_send.3
+++ /dev/null
@@ -1,64 +0,0 @@
-.TH zmq_send 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_send \- sends a message
-.SH SYNOPSIS
-.B int zmq_send (void *s, zmq_msg_t *msg, int flags);
-.SH DESCRIPTION
-Send the message
-.IR msg
-to the socket
-.IR s .
-.IR flags
-argument can be combination the flags described below.
-
-.IP "\fBZMQ_NOBLOCK\fP"
-The flag specifies that the operation should be performed in
-non-blocking mode. I.e. if it cannot be processed immediately,
-error should be returned with
-.IR errno
-set to EAGAIN.
-
-.IP "\fBZMQ_NOFLUSH\fP"
-The flag specifies that
-.IR zmq_send
-should not flush the message downstream immediately. Instead, it should batch
-ZMQ_NOFLUSH messages and send them downstream only once
-.IR zmq_flush
-is invoked. This is an optimisation for cases where several messages are sent
-in a single business transaction. However, the effect is measurable only in
-extremely high-perf scenarios (million messages a second or so).
-If that's not your case, use standard flushing send instead.
-
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-.IP "\fBEAGAIN\fP"
-it's a non-blocking send and message cannot be sent at the moment.
-.IP "\fBENOTSUP\fP"
-function isn't supported by particular socket type.
-.IP "\fBEFSM\fP"
-function cannot be called at the moment, because socket is not in the
-appropriate state. This error may occur with sockets that switch between
-several states (e.g. ZMQ_REQ).
-.SH EXAMPLE
-.nf
-zmq_msg_t msg;
-int rc = zmq_msg_init_size (&msg, 6);
-assert (rc == 0);
-memset (zmq_msg_data (&msg), 'A', 6);
-rc = zmq_send (s, &msg, 0);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_flush (3)
-.BR zmq_recv (3)
-.BR zmq_msg_init (3)
-.BR zmq_msg_init_size (3)
-.BR zmq_msg_init_data (3)
-.BR zmq_msg_data (3)
-.BR zmq_msg_size (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_setsockopt.3 b/man/man3/zmq_setsockopt.3
deleted file mode 100644
index f1dd9cb..0000000
--- a/man/man3/zmq_setsockopt.3
+++ /dev/null
@@ -1,137 +0,0 @@
-.TH zmq_setsockopt 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_setsockopt \- sets a specified option on a 0MQ socket
-.SH SYNOPSIS
-.B int zmq_setsockopt (void *s, int option, const void *optval, size_t optvallen); 
-.SH DESCRIPTION
-Sets an option on the socket.
-.IR option
-argument specifies the option from the list below.
-.IR optval
-is a pointer to the value to set,
-.IR optvallen
-is the size of the value in bytes.
-
-.IP "\fBZMQ_HWM\fP"
-High watermark for the message pipes associated with the socket. The water
-mark cannot be exceeded. If the messages don't fit into the pipe emergency
-mechanisms of the particular socket type are used (block, drop etc.) If HWM
-is set to zero, there are no limits for the content of the pipe.
-
-Type: int64_t  Unit: messages  Default: 0
-
-.IP "\fBZMQ_LWM\fP"
-Low watermark makes sense only if high watermark is defined (i.e. is non-zero).
-When the emergency state is reached when messages overflow the pipe, the
-emergency lasts at most till the size of the pipe decreases to low watermark.
-Normal state is resumed at that point.
-
-Type: int64_t  Unit: messages  Default: 0
-
-.IP "\fBZMQ_SWAP\fP"
-Swap allows the pipe to exceed high watermark. However, the data are written
-to the disk rather than held in the memory. Until high watermark is
-exceeded there is no disk activity involved though. The value of the option
-defines maximal size of the swap file.
-
-Type: int64_t  Unit: bytes  Default: 0
-
-.IP "\fBZMQ_AFFINITY\fP"
-Affinity defines which threads in the thread pool will be used to handle
-newly created sockets. This way you can dedicate some of the threads (CPUs)
-to a specific work. Value of 0 means no affinity. Work is distributed
-fairly among the threads in the thread pool. For non-zero values, the lowest
-bit corresponds to the thread 1, second lowest bit to the thread 2 etc.
-Thus, value of 3 means that from now on newly created sockets will handle
-I/O activity exclusively using threads no. 1 and 2.
-
-Type: int64_t  Unit: N/A (bitmap)  Default: 0
-
-.IP "\fBZMQ_IDENTITY\fP"
-Identity of the socket. Identity is important when restarting applications.
-If the socket has no identity, each run of the application is completely
-separated from other runs. However, with identity application reconnects to
-existing infrastructure left by the previous run. Thus it may receive
-messages that were sent in the meantime, it shares pipe limits with the
-previous run etc.
-
-Type: string  Unit: N/A  Default: NULL
-
-.IP "\fBZMQ_SUBSCRIBE\fP"
-Applicable only to ZMQ_SUB socket type. It establishes new message filter.
-When ZMQ_SUB socket is created all the incoming messages are filtered out.
-This option allows you to subscribe for all messages (""), or messages 
-beginning with specific prefix (e.g. "animals.mammals.dogs."). Multiple
-filters can be attached to a single 'sub' socket. In that case message passes
-if it matches at least one of the filters.
-
-Type: string  Unit: N/A  Default: N/A
-
-.IP "\fBZMQ_UNSUBSCRIBE\fP"
-Applicable only to ZMQ_SUB socket type. Removes existing message filter.
-The filter specified must match the string passed to ZMQ_SUBSCRIBE options
-exactly. If there were several instances of the same filter created,
-this options removes only one of them, leaving the rest in place
-and functional.
-
-Type: string  Unit: N/A  Default: N/A
-
-.IP "\fBZMQ_RATE\fP"
-This option applies only to sending side of multicast transports (pgm & udp).
-It specifies maximal outgoing data rate that an individual sender socket
-can send.
-
-Type: uint64_t  Unit: kilobits/second  Default: 100
-
-.IP "\fBZMQ_RECOVERY_IVL\fP"
-This option applies only to multicast transports (pgm & udp). It specifies
-how long can the receiver socket survive when the sender is inaccessible.
-Keep in mind that large recovery intervals at high data rates result in
-very large recovery buffers, meaning that you can easily overload your box
-by setting say 1 minute recovery interval at 1Gb/s rate (requires
-7GB in-memory buffer).
-
-Type: uint64_t Unit: seconds Default: 10 
-
-.IP "\fBZMQ_MCAST_LOOP\fP"
-This option applies only to multicast transports (pgm & udp). Value of 1
-means that the mutlicast packets can be received on the box they were sent
-from. Setting the value to 0 disables the loopback functionality which
-can have negative impact on the performance. If possible, disable
-the loopback in production environments.
-
-Type: uint64_t Unit: N/A (boolean value) Default: 1
-
-.IP "\fBZMQ_SNDBUF\fP"
-Sets the underlying kernel transmit buffer size to the specified size. See
-.IR SO_SNDBUF
-POSIX socket option. Value of zero means leaving the OS default unchanged.
-
-Type: uint64_t Unit: bytes Default: 0
-
-.IP "\fBZMQ_RCVBUF\fP"
-Sets the underlying kernel receive buffer size to the specified size. See
-.IR SO_RCVBUF
-POSIX socket option. Value of zero means leaving the OS default unchanged.
-
-Type: uint64_t Unit: bytes Default: 0
-
-.SH RETURN VALUE
-In case of success the function returns zero. Otherwise it returns -1 and
-sets
-.IR errno
-to the appropriate value.
-.SH ERRORS
-.IP "\fBEINVAL\fP"
-unknown option, a value with incorrect length or invalid value.
-.SH EXAMPLE
-.nf
-int rc = zmq_setsockopt (s, ZMQ_SUBSCRIBE, "", 0);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_socket (3)
-.BR zmq (7)
-
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_socket.3 b/man/man3/zmq_socket.3
deleted file mode 100644
index aceb306..0000000
--- a/man/man3/zmq_socket.3
+++ /dev/null
@@ -1,110 +0,0 @@
-.TH zmq_socket 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_socket \- creates 0MQ socket
-.SH SYNOPSIS
-.B void *zmq_socket (void *context, int type);
-.SH DESCRIPTION
-Open a socket within the specified
-.IR context .
-To create a context, use
-.IR zmq_init
-function.
-.IR type
-argument can be one of the values defined below. Note that each socket is owned
-by exactly one thread (the one that it was created from) and should not be used
-from any other thread.
-
-.IP "\fBZMQ_P2P\fP"
-Socket to communicate with a single peer. Allows for only a single connect or a
-single bind. There's no message routing or message filtering involved.
-
-Compatible peer sockets: ZMQ_P2P.
-
-.IP "\fBZMQ_PUB\fP"
-Socket to distribute data. Recv function is not implemented for this socket
-type. Messages are distributed in fanout fashion to all the peers.
-
-Compatible peer sockets: ZMQ_SUB.
-
-.IP "\fBZMQ_SUB\fP"
-Socket to subscribe for data. Send function is not implemented for this
-socket type. Initially, socket is subscribed for no messages. Use ZMQ_SUBSCRIBE
-option to specify which messages to subscribe for.
-
-Compatible peer sockets: ZMQ_PUB.
-
-.IP "\fBZMQ_REQ\fP"
-Socket to send requests and receive replies. Requests are load-balanced among
-all the peers. This socket type allows only an alternated sequence of
-send's and recv's.
-
-Compatible peer sockets: ZMQ_REP, ZMQ_XREP.
-
-.IP "\fBZMQ_REP\fP"
-Socket to receive requests and send replies. This socket type allows
-only an alternated sequence of recv's and send's. Each send is routed to
-the peer that issued the last received request.
-
-Compatible peer sockets: ZMQ_REQ, ZMQ_XREQ.
-
-.IP "\fBZMQ_XREQ\fP"
-Special socket type to be used in request/reply middleboxes such as
-.BR zmq_queue(7) .
-Requests forwarded using this socket type should be tagged by a proper prefix
-identifying the original requester. Replies received by this socket are tagged
-with a proper postfix that can be use to route the reply back to the original
-requester.
-
-Compatible peer sockets: ZMQ_REP, ZMQ_XREP.
-
-.IP "\fBZMQ_XREP\fP"
-Special socket type to be used in request/reply middleboxes such as
-.BR zmq_queue(7) .
-Requests received using this socket are already properly tagged with prefix
-identifying the original requester. When sending a reply via XREP socket the
-message should be tagged with a prefix from a corresponding request.
-
-Compatible peer sockets: ZMQ_REQ, ZMQ_XREQ.
-
-.IP "\fBZMQ_UPSTREAM\fP"
-Socket to receive messages from up the stream. Messages are fair-queued
-from among all the connected peers. Send function is not implemented for
-this socket type.
-
-Compatible peer sockets: ZMQ_DOWNSTREAM.
-
-.IP "\fBZMQ_DOWNSTREAM\fP"
-Socket to send messages down stream. Messages are load-balanced among all the
-connected peers. Recv function is not implemented for this socket type.
-
-Compatible peer sockets: ZMQ_UPSTREAM.
-
-.SH RETURN VALUE
-Function returns socket handle is successful. Otherwise it returns NULL and
-sets errno to one of the values below.
-.SH ERRORS
-.IP "\fBEINVAL\fP"
-invalid socket type.
-.IP "\fBEMTHREAD\fP"
-the number of application threads allowed to own 0MQ sockets was exceeded. See
-.IR app_threads
-parameter to
-.IR zmq_init
-function.
-.SH EXAMPLE
-.nf
-void *s = zmq_socket (context, ZMQ_PUB);
-assert (s);
-int rc = zmq_bind (s, "tcp://192.168.0.1:5555");
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_init (3)
-.BR zmq_setsockopt (3)
-.BR zmq_bind (3)
-.BR zmq_connect (3)
-.BR zmq_send (3)
-.BR zmq_flush (3)
-.BR zmq_recv (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_strerror.3 b/man/man3/zmq_strerror.3
deleted file mode 100644
index 1ee2efe..0000000
--- a/man/man3/zmq_strerror.3
+++ /dev/null
@@ -1,27 +0,0 @@
-.TH zmq_strerror 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_strerror \- returns string describing the error number
-.SH SYNOPSIS
-.B const char *zmq_strerror (int errnum);
-.SH DESCRIPTION
-As 0MQ defines few additional (non-POSIX) error codes, standard
-.IR strerror
-isn't capable of translating those errors into human readable strings. Instead,
-.IR zmq_strerror
-should be used.
-.SH RETURN VALUE
-Returns string describing the error number.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-void *ctx = zmq_init (1, 1, 0);
-if (!ctx) {
-    printf ("error occured during zmq_init: %s\\n", zmq_strerror (errno));
-    abort ();
-}
-.fi
-.SH SEE ALSO
-.BR zmq (7)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>
diff --git a/man/man3/zmq_term.3 b/man/man3/zmq_term.3
deleted file mode 100644
index b0b8962..0000000
--- a/man/man3/zmq_term.3
+++ /dev/null
@@ -1,25 +0,0 @@
-.TH zmq_term 3 "" "(c)2007-2010 iMatix Corporation" "0MQ User Manuals"
-.SH NAME
-zmq_term \- terminates 0MQ context
-.SH SYNOPSIS
-.B int zmq_term (void *context);
-.SH DESCRIPTION
-Destroys 0MQ context. However, if there are still any sockets open within
-the context,
-.IR zmq_term
-succeeds but shutdown of the context is delayed till the last socket is closed.
-.SH RETURN VALUE
-Function returns zero is successful. Otherwise it returns -1 and
-sets errno to one of the values below.
-.SH ERRORS
-No errors are defined.
-.SH EXAMPLE
-.nf
-int rc = zmq_term (context);
-assert (rc == 0);
-.fi
-.SH SEE ALSO
-.BR zmq_init (3)
-.BR zmq_close (3)
-.SH AUTHOR
-Martin Sustrik <sustrik at 250bpm dot com>