2 files changed, 21 insertions, 0 deletions
diff --git a/doc/zmq_getsockopt.txt b/doc/zmq_getsockopt.txt
index f08748b..7886eaf 100644
--- a/doc/zmq_getsockopt.txt
+++ b/doc/zmq_getsockopt.txt
@@ -37,6 +37,7 @@ be returned. Otherwise, a value of 1 shall be returned.
 Refer to linkzmq:zmq_send[3] and linkzmq:zmq_recv[3] for a detailed description
 of sending/receiving multi-part messages.
 
+[horizontal]
 Option value type:: int64_t
 Option value unit:: boolean
 Default value:: N/A
@@ -58,6 +59,7 @@ type.
 
 The default 'ZMQ_HWM' value of zero means "no limit".
 
+[horizontal]
 Option value type:: int64_t
 Option value unit:: messages
 Default value:: 0
@@ -73,6 +75,7 @@ offloaded to storage on disk rather than held in memory.
 
 The value of 'ZMQ_SWAP' defines the maximum size of the swap space in bytes.
 
+[horizontal]
 Option value type:: int64_t
 Option value unit:: bytes
 Default value:: 0
@@ -95,6 +98,7 @@ exclusively by I/O threads 1 and 2.
 See also linkzmq:zmq_init[3] for details on allocating the number of I/O
 threads for a specific _context_.
 
+[horizontal]
 Option value type:: int64_t
 Option value unit:: N/A (bitmap)
 Default value:: 0
@@ -117,6 +121,7 @@ queue_ limits shall be shared with previous run(s) and so on.
 Identity can be at least one byte and at most 255 bytes long. Identities
 starting with binary zero are reserved for use by 0MQ infrastructure.
 
+[horizontal]
 Option value type:: binary data
 Option value unit:: N/A
 Default value:: NULL
@@ -128,6 +133,7 @@ ZMQ_RATE: Retrieve multicast data rate
 The 'ZMQ_RATE' option shall retrieve the maximum send or receive data rate for
 multicast transports using the specified 'socket'.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: kilobits per second
 Default value:: 100
@@ -141,6 +147,7 @@ multicast transports using the specified 'socket'.  The recovery interval
 determines the maximum time in seconds that a receiver can be absent from a
 multicast group before unrecoverable data loss will occur.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: seconds
 Default value:: 10
@@ -157,6 +164,7 @@ multicast loopback enabled when it is not required can have a negative impact
 on performance. Where possible, disable 'ZMQ_MCAST_LOOP' in production
 environments.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: boolean
 Default value:: 1
@@ -170,6 +178,7 @@ size for the specified 'socket'. A value of zero means that the OS default is
 in effect. For details refer to your operating system documentation for the
 'SO_SNDBUF' socket option.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: bytes
 Default value:: 0
@@ -183,6 +192,7 @@ size for the specified 'socket'. A value of zero means that the OS default is
 in effect. For details refer to your operating system documentation for the
 'SO_RCVBUF' socket option.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: bytes
 Default value:: 0
diff --git a/doc/zmq_setsockopt.txt b/doc/zmq_setsockopt.txt
index 93c5889..a5a2601 100644
--- a/doc/zmq_setsockopt.txt
+++ b/doc/zmq_setsockopt.txt
@@ -38,6 +38,7 @@ type.
 
 The default 'ZMQ_HWM' value of zero means "no limit".
 
+[horizontal]
 Option value type:: int64_t
 Option value unit:: messages
 Default value:: 0
@@ -53,6 +54,7 @@ storage on disk rather than held in memory.
 
 The value of 'ZMQ_SWAP' defines the maximum size of the swap space in bytes.
 
+[horizontal]
 Option value type:: int64_t
 Option value unit:: bytes
 Default value:: 0
@@ -75,6 +77,7 @@ exclusively by I/O threads 1 and 2.
 See also linkzmq:zmq_init[3] for details on allocating the number of I/O
 threads for a specific _context_.
 
+[horizontal]
 Option value type:: int64_t
 Option value unit:: N/A (bitmap)
 Default value:: 0
@@ -97,6 +100,7 @@ queue_ limits shall be shared with previous run(s) and so on.
 Identity should be at least one byte and at most 255 bytes long. Identities
 starting with binary zero are reserved for use by 0MQ infrastructure.
 
+[horizontal]
 Option value type:: binary data
 Option value unit:: N/A
 Default value:: NULL
@@ -115,6 +119,7 @@ with the specified prefix. Mutiple filters may be attached to a single
 'ZMQ_SUB' socket, in which case a message shall be accepted if it matches at
 least one filter.
 
+[horizontal]
 Option value type:: binary data
 Option value unit:: N/A
 Default value:: N/A
@@ -129,6 +134,7 @@ established with the 'ZMQ_SUBSCRIBE' option. If the socket has several
 instances of the same filter attached the 'ZMQ_UNSUBSCRIBE' option shall remove
 only one instance, leaving the rest in place and functional.
 
+[horizontal]
 Option value type:: binary data
 Option value unit:: N/A
 Default value:: N/A
@@ -140,6 +146,7 @@ ZMQ_RATE: Set multicast data rate
 The 'ZMQ_RATE' option shall set the maximum send or receive data rate for
 multicast transports such as linkzmq:zmq_pgm[7] using the specified 'socket'.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: kilobits per second
 Default value:: 100
@@ -157,6 +164,7 @@ CAUTION: Excersize care when setting large recovery intervals as the data
 needed for recovery will be held in memory. For example, a 1 minute recovery
 interval at a data rate of 1Gbps requires a 7GB in-memory buffer.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: seconds
 Default value:: 10
@@ -173,6 +181,7 @@ loopback enabled when it is not required can have a negative impact on
 performance. Where possible, disable 'ZMQ_MCAST_LOOP' in production
 environments.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: boolean
 Default value:: 1
@@ -186,6 +195,7 @@ for the 'socket' to the specified size in bytes.  A value of zero means leave
 the OS default unchanged. For details please refer to your operating system
 documentation for the 'SO_SNDBUF' socket option.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: bytes
 Default value:: 0
@@ -199,6 +209,7 @@ the 'socket' to the specified size in bytes.  A value of zero means leave the
 OS default unchanged. For details refer to your operating system documentation
 for the 'SO_RCVBUF' socket option.
 
+[horizontal]
 Option value type:: uint64_t
 Option value unit:: bytes
 Default value:: 0