summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)Author
2011-05-15ZMQ_MULTICAST_HOPS socket option addedMartin Sustrik
Sets the time-to-live field in every multicast packet sent from the socket. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-04-19Message validity is checked in the runtimeMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-04-18zmq_socket(3) describes the EMFILE error codeMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-04-15zmq_send(3) manpage improvedMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-04-11Fixed examplePieter Hintjens
Signed-off-by: Pieter Hintjens <ph@imatix.com>
2011-04-09Run-time checking for context & socket validity addedMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-04-03Add note about thread-safety to zmq_msg_init_data() manpage.Robert G. Jakabosky
Signed-off-by: Robert G. Jakabosky <bobby@sharedrealm.com>
2011-04-01PGM wire format specification improved in zmq_pgm(7)Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-26ZMQ_NOBLOCK renamed ZMQ_DONTWAITMartin Sustrik
Done because of POSIX compliance Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_HWM split into ZMQ_SNDHWM and ZMQ_RCVHWMMartin Sustrik
These new options allow to control the maximum size of the inbound and outbound message pipe separately. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_HWM type changed to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_RATE and ZMQ_RECOVERY_IVL types cahnged to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_EVENTS type changed to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_RCVMORE type changed to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_SNDBUF and ZMQ_RCVBUF type changed to intMartin Sustrik
This mimics POSIX specification. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_RECOVERY_IVL and ZMQ_RECOVERY_IVL_MSEC reconciledMartin Sustrik
There's only one option now -- ZMQ_RECOVRY_IVL -- and it's measured in milliseconds. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24SWAP functionality removedMartin Sustrik
On-disk storage should be implemented in devices rather than in 0MQ core. 0MQ is a networking library and there's no point in storing network buffers on disk. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24C++ binding removed from the coreMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-23Pre-compiled devices removedMartin Sustrik
Along with the devices, xmlParser which is no longer needed is removed. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-23ZMQ_MCAST_LOOP removedMartin Sustrik
Multicast loopback is not a real multicast, rather a kernel-space simulation. Moreover, it tends to be rather unreliable and lossy. Removing the option will force users to use transports better suited for the job, such as inproc or ipc. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-23Timeout in zmq_poll is in millisecondsMartin Sustrik
The old timeout in microsecond haven't been compliant with POSIX and was impractical at the same time. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-23Obsolete note removed from zmq_poll(3) manpageMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-16zmq_socket(3) and zmq_setsockopt(3) man pages improvedMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-03Documentation wrt thread-safety cleaned up.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-02ZMQ_MAXMSGSIZE option addedMartin Sustrik
The new option allows user to guard against peers sending oversized messages. Connection to peer sending oversized message is dropped. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-02-24Minor patch to zmq_getsockopt(3) man pageMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-02-15Added note regarding setting sockopt before bind/connectMichael Compton
Signed-off-by: Michael Compton <michael.compton@littleedge.co.uk>
2011-02-09Initial implementation of reaper thread.Martin Sustrik
Reaper thread destroys the socket asynchronously. zmq_term() can be interrupted by a signal (EINTR). zmq_socket() will return ETERM after zmq_term() was called. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-01-26ZMQ_RECONNECT_IVL_MAX socket option addedThijs Terlouw
It allows for exponential back-off strategy when reconnecting. Signed-off-by: Thijs Terlouw <thijsterlouw@gmail.com>
2011-01-17Typo fixed in zmq_send(3) man page.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-12-09Added Recovery Interval in MillisecondsBob Beaty
For very high-speed message systems, the memory used for recovery can get to be very large. The corrent limitation on that reduction is the ZMQ_RECOVERY_IVL of 1 sec. I added in an additional option ZMQ_RECOVERY_IVL_MSEC, which is the Recovery Interval in milliseconds. If used, this will override the previous one, and allow you to set a sub-second recovery interval. If not set, the default behavior is to use ZMQ_RECOVERY_IVL. Signed-off-by: Bob Beaty <rbeaty@peak6.com>
2010-12-07Clarify zmq_send() operation for ZMQ_PUB socketsMartin Lucina
Signed-off-by: Martin Lucina <mato@kotelna.sk>
2010-12-01Documentation updates for 2.1Martin Lucina
- Clarify ZMQ_LINGER, zmq_close (), zmq_term () relationship - New socket options - Clarify thread safety of sockets and migration between threads - Other minor and spelling fixes Signed-off-by: Martin Lucina <mato@kotelna.sk>
2010-11-04Fix documentation typosJacob Rideout
Signed-off-by: Jacob Rideout <jacob.rideout@returnpath.net>
2010-10-30Documentation for zmq_close and zmq_term fixed.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-17Minor typo fixed in zmq_getsockopt(3) man page.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-17ZMQ_BACKLOG socket option added.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-17ZMQ_RECONNECT_IVL socket options added.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-16ZMQ_LINGER socket option added.Martin Sustrik
1. ZMQ_LINGER option can be set/get 2. options are part of own_t base class rather than being declared separately by individual objects 3. Linger option is propagated with "term" command so that the newest value of it is used rather than the stored old one. 4. Session sets the linger timer if needed and terminates as soon as it expires. 5. Corresponding documentation updated. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-14zmq_poll man page fixed to reflect the precise timeout semantics.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-09-28ZMQ_TYPE socket option addedGonzalo Diethelm
2010-09-27ZMQ_FD and ZMQ_EVENTS documentation addedMartin Sustrik
2010-09-09when no I/O threads are available error is raised instead of assertionMartin Sustrik
2010-09-08EINTR returned from the blocking functionsMartin Sustrik
2010-09-04Merge branch 'maint'Martin Lucina
* maint: Update .gitignore doc: Add 0MQ version to XHTML11 backend footer build: Generate ChangeLog in 'make dist', ZIP automatically
2010-09-04doc: Add 0MQ version to XHTML11 backend footerMartin Lucina
Thanks to Matt Weinstein for the suggestion.
2010-09-04Merge branch 'maint'Martin Lucina
* maint: doc: Update zmq_socket(3) for 2.0.8 API changes Revert "Added man page for the zmq_device method" Revert "Added clean target that deletes generated man pages" Revert "Various changes to documentation project:" Revert "Reverting 'clean' change to Makefile" Revert "Removed empty man pages for old standalone devices" Revert "Further cleanups on reference manual" Revert "Small improvements to zmq_device(3) page" Revert "Removed wip zmq_deviced from master"
2010-09-04doc: Update zmq_socket(3) for 2.0.8 API changesMartin Lucina
2010-09-04Revert "Added man page for the zmq_device method"Martin Lucina
This reverts commit f575f252c99c99d3622f313d6bbad6635197a1e4. Conflicts: doc/zmq_device.txt
2010-09-04Revert "Added clean target that deletes generated man pages"Martin Lucina
This reverts commit 6cd90304476c1c6873d67068009def63e520b848.