summaryrefslogtreecommitdiff
path: root/src/options.cpp
AgeCommit message (Collapse)Author
2011-07-15non-immediate_connect functionality removedMartin Sustrik
It was used only by ROUTER socket. After its removal it became obsolete. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-07-11ZMQ_FILTER option removedMartin Sustrik
The filtering is now done depending on the socket type. SUB socket filters the messages (end-to-end filtering) while XSUB relies on upstream nodes to do (imprefect) filtering. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-06-23Outstanding requests dropped when requester dies (issue 190)Martin Sustrik
So far the requests in req/rep pattern were delivered to and processed by worker even though the original requester was dead. Thus, the worker processing replies with noone to deliver results to. This optimisation drops requests in two situations: 1. Queued inbound requests in XREP socket when peer disconnects. 2. Queued outbound requests in XREQ when socket is closed. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-06-17Add sockopt ZMQ_RCVTIMEO/ZMQ_SNDTIMEO.Fabien Ninoles
- Add doc and tests - Add options and setup - Wait using poll/select Signed-off-by: Fabien Ninoles <fabien@tzone.org> Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-06-12ZMQ_FILTER socket option addedMartin Sustrik
This option is a performance tweak. In devices XSUB socket filters the messages just to send them to XPUB socket which filters them once more. Setting ZMQ_FILTER option to 0 allows to switch the filtering in XSUB socket off. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-05-22Introduces bi-directional pipesMartin Sustrik
So far, there was a pair of unidirectional pipes between a socket and a session (or an inproc peer). This resulted in complex problems with half-closed states and tracking which inpipe corresponds to which outpipe. This patch doesn't add any functionality in itself, but is essential for further work on features like subscription forwarding. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-05-15ZMQ_MULTICAST_HOPS socket option addedMartin Sustrik
Sets the time-to-live field in every multicast packet sent from the socket. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-04-21Message-related functionality factored out into msg_t class.Martin Sustrik
This patch addresses serveral issues: 1. It gathers message related functionality scattered over whole codebase into a single class. 2. It makes zmq_msg_t an opaque datatype. Internals of the class don't pollute zmq.h header file. 3. zmq_msg_t size decreases from 48 to 32 bytes. That saves ~33% of memory in scenarios with large amount of small messages. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_HWM split into ZMQ_SNDHWM and ZMQ_RCVHWMMartin Sustrik
These new options allow to control the maximum size of the inbound and outbound message pipe separately. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_HWM type changed to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_RATE and ZMQ_RECOVERY_IVL types cahnged to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_SNDBUF and ZMQ_RCVBUF type changed to intMartin Sustrik
This mimics POSIX specification. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_RECOVERY_IVL and ZMQ_RECOVERY_IVL_MSEC reconciledMartin Sustrik
There's only one option now -- ZMQ_RECOVRY_IVL -- and it's measured in milliseconds. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24SWAP functionality removedMartin Sustrik
On-disk storage should be implemented in devices rather than in 0MQ core. 0MQ is a networking library and there's no point in storing network buffers on disk. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-23ZMQ_MCAST_LOOP removedMartin Sustrik
Multicast loopback is not a real multicast, rather a kernel-space simulation. Moreover, it tends to be rather unreliable and lossy. Removing the option will force users to use transports better suited for the job, such as inproc or ipc. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-02The copyrights in file headers updated.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-02ZMQ_MAXMSGSIZE option addedMartin Sustrik
The new option allows user to guard against peers sending oversized messages. Connection to peer sending oversized message is dropped. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-01-26ZMQ_RECONNECT_IVL_MAX socket option addedThijs Terlouw
It allows for exponential back-off strategy when reconnecting. Signed-off-by: Thijs Terlouw <thijsterlouw@gmail.com>
2010-12-09Added Recovery Interval in MillisecondsBob Beaty
For very high-speed message systems, the memory used for recovery can get to be very large. The corrent limitation on that reduction is the ZMQ_RECOVERY_IVL of 1 sec. I added in an additional option ZMQ_RECOVERY_IVL_MSEC, which is the Recovery Interval in milliseconds. If used, this will override the previous one, and allow you to set a sub-second recovery interval. If not set, the default behavior is to use ZMQ_RECOVERY_IVL. Signed-off-by: Bob Beaty <rbeaty@peak6.com>
2010-10-30Name of "GNU Lesser Public License" corrected.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-17ZMQ_BACKLOG socket option added.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-17ZMQ_RECONNECT_IVL socket options added.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-16ZMQ_LINGER socket option added.Martin Sustrik
1. ZMQ_LINGER option can be set/get 2. options are part of own_t base class rather than being declared separately by individual objects 3. Linger option is propagated with "term" command so that the newest value of it is used rather than the stored old one. 4. Session sets the linger timer if needed and terminates as soon as it expires. 5. Corresponding documentation updated. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-09-28ZMQ_TYPE socket option addedGonzalo Diethelm
2010-09-15values of RATE, RECOVERY_IVL and SWAP options are checked for negative valuesMartin Sustrik
2010-05-25LWM is computed rather than explicitly specified by userMartin Sustrik
2010-04-09zmq_getsockopt function addedMartin Sustrik
2010-03-20XREP-style prefixing/trimming messages removedMartin Sustrik
2010-03-12Implement flow controlMartin Hurton
This commit introduces the necessary changes necessary for implementing flow control. None of the socket types implements the flow control yet. The code will crash when the flow control is enabled and the thw lwm is reached. The following commits will add flow-control support for individual socket types.
2010-03-11Restructure language bindingsMartin Lucina
C and C++ headers moved from bindings/ to include/, bindings/ removed --with-c and --with-cpp options to configure removed, C and C++ now built and installed by default
2010-02-19Multi-hop REQ/REP, part XII., generate unique identities for anonymous ↵Martin Sustrik
connections
2010-02-14Multi-hop REQ/REP, part X., optional delayed creation of pipes during connectMartin Sustrik
2010-02-13Multi-hop REQ/REP, part IX., pass the peer identity as far as socket_base_tMartin Sustrik
2010-02-12Multi-hop REQ/REP, part III., change 'type' in options to simple ↵Martin Sustrik
'traceroute' flag
2010-02-12Multi-hop REQ/REP, part I., socket type is known to all associated objectsMartin Sustrik
2010-01-05Copyrights transferred from FastMQ to iMatixMartin Sustrik
2009-12-10ZMQII-27: Allow setting SNDBUF and RCVBUF size from 0MQ API (POSIX)Martin Sustrik
2009-09-23ZMQII-14: Change default for ZMQ_MCAST_LOOP to truemalosek
2009-09-21different fixes to req/repMartin Sustrik
2009-09-21initial version of req/rep socketsMartin Sustrik
2009-09-16added OpenPGM receiver - ZMQ_SUBmalosek
2009-09-14java binding sets socket options using setsockopt functionMartin Sustrik
2009-09-11added OpenPGM sender - ZMQ_PUBmalosek
2009-08-12listener/connecter/init/session addedMartin Sustrik