summaryrefslogtreecommitdiff
path: root/src/pair.cpp
AgeCommit message (Collapse)Author
2012-05-20Implement SP wire protocolspMartin Lucina
Implements the SP wire protocol, and infrastructure for legacy wire protocol support. Also added an XS_SERVICE_ID socket option to set the service id and renamed the XS_PROTOCOL option to XS_PATTERN_VERSION. The following pattern versions are supported: PAIR: v3 PUBSUB: v1 (legacy), v4 REQREP: v2 PIPELINE: v3 SURVEY: v2 Note that all existing pattern versions have been bumped by 1 to allow for use of legacy protocols (otherwise there would be no way to distinguish between e.g. PUBSUB v3 and PUBSUB v3 using SP). Signed-off-by: Martin Lucina <martin@lucina.net>
2012-05-15Do not crash when multiple peers connect to PAIR socketMartin Hurton
When more then one peer connected to a PAIR socket, an application aborted due to assertion failure. This patch changes the PAIR socket behaviour so that it rejects any further connection requests.
2012-05-01Revert "Implement protocol versioning (except PGM)"Martin Sustrik
This reverts commit 512f3a604924fec9d89e2b4bfd6f73aa66309fa7.
2012-04-29Implement protocol versioning (except PGM)Martin Lucina
Implements SP protocol versioning, legacy protocol support, and the following pattern protocol versions: PAIR: v2 PUBSUB: v1 (legacy), v3 REQREP: v1 PIPELINE: v2 SURVEY: v1 Engine support is only for stream_engine_t at this stage. Signed-off-by: Martin Lucina <martin@lucina.net>
2012-02-16Full name of the project used in license headersMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2012-02-16poller_base_t renamed to io_thread_tMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2012-02-16io_thread_t merged with poller_base_tMartin Sustrik
The relationship of these two classes was 1:1. Thus one of them was obsolete. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2012-02-16Fix data loss for PUB/SUB and unidirectional transports (LIBZMQ-268)Martin Lucina
With the introduction of subscription forwarding, the first message sent on a PUB socket using a unidirectional transport (e.g. PGM) is always lost due to the "subscribe to all" being done asynchronously. This patch fixes the problem and also refactors the code to have a single point where the "subscribe to all" is performed. Signed-off-by: Martin Lucina <martin@lucina.net>
2012-02-16ZeroMQ renamed to CrossroadsMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2012-02-16Socket ID addedMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-11-01Copyright dates adjusted to reflect realityMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-10-31250bpm copyrights addedMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-09-15Session class separated into socket-type-specific sessionsMartin Sustrik
This is a preliminary patch allowing for socket-type-specific functionality in the I/O thread. For example, message format can be checked asynchronously and misbehaved connections dropped straight away. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-07-15ZMQ_IDENTITY socket option removedMartin Sustrik
This patch simplifies the whole codebase significantly, including dropping depedency on libuuid. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-05-23Move the pipe termination code to socket_base_tMartin Sustrik
So far, the pipe termination code was spread among socket type classes, fair queuer, load balancer, etc. This patch moves all the associated logic to a single place. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-05-22Introduces bi-directional pipesMartin Sustrik
So far, there was a pair of unidirectional pipes between a socket and a session (or an inproc peer). This resulted in complex problems with half-closed states and tracking which inpipe corresponds to which outpipe. This patch doesn't add any functionality in itself, but is essential for further work on features like subscription forwarding. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-04-21Message-related functionality factored out into msg_t class.Martin Sustrik
This patch addresses serveral issues: 1. It gathers message related functionality scattered over whole codebase into a single class. 2. It makes zmq_msg_t an opaque datatype. Internals of the class don't pollute zmq.h header file. 3. zmq_msg_t size decreases from 48 to 32 bytes. That saves ~33% of memory in scenarios with large amount of small messages. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-02The copyrights in file headers updated.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-12-15Fixes assertion on pipe.cpp:237 when swap fills up.Mikko Koppanen
Fixes swap::full () functionality Signed-off-by: Mikko Koppanen <mkoppanen@php.net>
2010-11-05slots renamed to tidsMartin Sustrik
Threads were so far identified by integers called 'slots'. This patch renames them to more comprehensible 'tid's (thread IDs). Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-30Name of "GNU Lesser Public License" corrected.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-16ZMQ_LINGER socket option added.Martin Sustrik
1. ZMQ_LINGER option can be set/get 2. options are part of own_t base class rather than being declared separately by individual objects 3. Linger option is propagated with "term" command so that the newest value of it is used rather than the stored old one. 4. Session sets the linger timer if needed and terminates as soon as it expires. 5. Corresponding documentation updated. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-08Clean-up of session termination processMartin Sustrik
Specifically, shutdown of child objects is initiated *before* termination handshake with socket object. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-01issue 92 -- Assertion failed: inpipe && outpipe (pair.cpp:86) -- fixedMartin Sustrik
2010-09-28ZMQ_TYPE socket option addedGonzalo Diethelm
2010-09-01pipe being attached to the PAIR socket during its termination process is ↵Martin Sustrik
immediately asked to terminate itself
2010-08-25I/O object hierarchy implementedMartin Sustrik
2010-08-25WIP: Socket migration between threads, new zmq_close() semanticsMartin Sustrik
Sockets may now be migrated between OS threads; sockets may not be used by more than one thread at any time. To migrate a socket to another thread the caller must ensure that a full memory barrier is called before using the socket from the target thread. The new zmq_close() semantics implement the behaviour discussed at: http://lists.zeromq.org/pipermail/zeromq-dev/2010-July/004244.html Specifically, zmq_close() is now deterministic and while it still returns immediately, it does not discard any data that may still be queued for sending. Further, zmq_term() will now block until all outstanding data has been sent. TODO: Many bugs have been introduced, needs testing. Further, SO_LINGER or an equivalent mechanism (possibly a configurable timeout to zmq_term()) needs to be implemented.
2010-06-19fix double free error in PAIR socketMartin Hurton
2010-04-26P2P renamed to PAIRMartin Sustrik