Age | Commit message (Collapse) | Author |
|
Implements SP protocol versioning, legacy protocol support, and the
following pattern protocol versions:
PAIR: v2
PUBSUB: v1 (legacy), v3
REQREP: v1
PIPELINE: v2
SURVEY: v1
Engine support is only for stream_engine_t at this stage.
Signed-off-by: Martin Lucina <martin@lucina.net>
|
|
- couple of comments adjusted
- empty 'stack delimiter' message correctly closed
- non-reachable function xrep_t::rollback() removed
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
When connection with duplicate identity arrives it is ignored.
Till now it resulted in assertion.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
This is a fail-fast mechanism to prevent undefined behaviour later
on. In the future, the new connection should be closed in this case.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
The relationship of these two classes was 1:1.
Thus one of them was obsolete.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
With the introduction of subscription forwarding, the first message
sent on a PUB socket using a unidirectional transport (e.g. PGM) is
always lost due to the "subscribe to all" being done asynchronously.
This patch fixes the problem and also refactors the code to have a
single point where the "subscribe to all" is performed.
Signed-off-by: Martin Lucina <martin@lucina.net>
|
|
Iterator was checked although the item it was pointing to was erased.
Now it never happens.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
When polling on XREP socket in incoming message part was prefetched,
but not the identity of sender. The problem is fixed by this patch.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
wq:
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
However, the "durable socket" behaviour wasn't re-added.
Identities are used solely for routing in REQ/REP pattern.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
This is a preliminary patch allowing for socket-type-specific
functionality in the I/O thread. For example, message format
can be checked asynchronously and misbehaved connections dropped
straight away.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
This patch simplifies the whole codebase significantly,
including dropping depedency on libuuid.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
So far the requests in req/rep pattern were delivered to and processed
by worker even though the original requester was dead. Thus,
the worker processing replies with noone to deliver results to.
This optimisation drops requests in two situations:
1. Queued inbound requests in XREP socket when peer disconnects.
2. Queued outbound requests in XREQ when socket is closed.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Up to now the complexity of fair-queueing in XREP was O(n).
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
This patch introduces two changes:
1. 32-bit ID is used to identify the peer instead of UUID
2. REQ socket seeds the label stack with unique 32-bit request ID
It also drops any replies with non-matching request ID
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
So far there was no distinction between message parts used by 0MQ
and message parts used by user. Now, the message parts used by 0MQ
are marked as 'LABEL'.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
So far, the pipe termination code was spread among socket type
classes, fair queuer, load balancer, etc. This patch moves
all the associated logic to a single place.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
So far, there was a pair of unidirectional pipes between a socket
and a session (or an inproc peer). This resulted in complex
problems with half-closed states and tracking which inpipe
corresponds to which outpipe.
This patch doesn't add any functionality in itself, but is
essential for further work on features like subscription
forwarding.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Pieter Hintjens <ph@imatix.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Moving the erase after the access and check agains current_id.
|
|
When an inpipe terminated within XREP, it was erased from the array
and thus current_in (which is an index) pointed to a different
element in the array. This caused problems when we were in the
middle of reading a multipart message.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
This patch addresses serveral issues:
1. It gathers message related functionality scattered over whole
codebase into a single class.
2. It makes zmq_msg_t an opaque datatype. Internals of the class
don't pollute zmq.h header file.
3. zmq_msg_t size decreases from 48 to 32 bytes. That saves ~33%
of memory in scenarios with large amount of small messages.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Jon Dyte <jon@totient.co.uk>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Threads were so far identified by integers called 'slots'.
This patch renames them to more comprehensible 'tid's (thread IDs).
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
1. ZMQ_LINGER option can be set/get
2. options are part of own_t base class rather than being declared
separately by individual objects
3. Linger option is propagated with "term" command so that the
newest value of it is used rather than the stored old one.
4. Session sets the linger timer if needed and terminates
as soon as it expires.
5. Corresponding documentation updated.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
The patch was supposed to check that pipe writer sends messages
in atomic fashion. However, it prevented the user to read
half of a message and close the socket.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Specifically, shutdown of child objects is initiated *before* termination
handshake with socket object.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
|