Age | Commit message (Collapse) | Author |
|
pthread_* functions return the error number rather than
setting errno. This was not accounter for till now.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
IPv6 addresses have colons and will produce invalid data for the getaddrinfo lookup.
Signed-off-by: Andrew Thompson <andy@fud.org.nz>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
So far the requests in req/rep pattern were delivered to and processed
by worker even though the original requester was dead. Thus,
the worker processing replies with noone to deliver results to.
This optimisation drops requests in two situations:
1. Queued inbound requests in XREP socket when peer disconnects.
2. Queued outbound requests in XREQ when socket is closed.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Up to now the complexity of fair-queueing in XREP was O(n).
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
This patch introduces two changes:
1. 32-bit ID is used to identify the peer instead of UUID
2. REQ socket seeds the label stack with unique 32-bit request ID
It also drops any replies with non-matching request ID
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
So far there was no distinction between message parts used by 0MQ
and message parts used by user. Now, the message parts used by 0MQ
are marked as 'LABEL'.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
For the platforms that don't support MSG_DONTWAIT the reader
socket in mailbox_t was kept in non-blocking state and flipped
to blocking state and back when blocking read was requested.
Now, the state is preserved between calls and flipped only
if different type of operation (block vs. non-block) is
requested.
Signed-off-by: Fabien Ninoles <fabien@tzone.org>
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
When session is already terminating and reconnection happens at
that point, the session should not create new pipe to its socket.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
pipe_t now correctly drops pointer to the underlying pipe when
sending pipe_term_ack command.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
|
|
<steven.mccoy@miru.hk>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
- Add doc and tests
- Add options and setup
- Wait using poll/select
Signed-off-by: Fabien Ninoles <fabien@tzone.org>
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
This patch fixed the JIRA issue 223
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Fix windows.h included before winsock2.h.
Remove definition of _WINSOCKAPI_.
Signed-off-by: Steven McCoy <steven.mccoy@miru.hk>
|
|
This option is a performance tweak. In devices XSUB socket filters
the messages just to send them to XPUB socket which filters them
once more. Setting ZMQ_FILTER option to 0 allows to switch the
filtering in XSUB socket off.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
This patch will prevent duplicate matching in devices in the future.
Instead of matching in both XPUB and XSUB, it'll happen only
in XPUB. Receiver endpoint will still filter messages via SUB
socket.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Bug in previous refactoring fixed.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Till now the code was spread over mutliple locations.
Additionally, the code was made more formally correct,
with explicit pipe state machine etc.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Allow to have the same item part of two different arrays, as long as
they are using different array identifier.
|
|
So far, the pipe termination code was spread among socket type
classes, fair queuer, load balancer, etc. This patch moves
all the associated logic to a single place.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
So far, there was a pair of unidirectional pipes between a socket
and a session (or an inproc peer). This resulted in complex
problems with half-closed states and tracking which inpipe
corresponds to which outpipe.
This patch doesn't add any functionality in itself, but is
essential for further work on features like subscription
forwarding.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Paul Colomiets <pc@gafol.net>
|
|
Signed-off-by: Paul Colomiets <pc@gafol.net>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Sets the time-to-live field in every multicast packet sent from the socket.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Signed-off-by: Pieter Hintjens <ph@imatix.com>
|
|
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
Moving the erase after the access and check agains current_id.
|
|
The two functions had different calling conventions (C vs. C++).
It is fixed now.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|
|
ICC doesn't recognise that assert(false) terminates the program
and thus complains that certain functions have no return values.
This patch supplies dummy return values to keep the compiler happy.
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
|