summaryrefslogtreecommitdiff
path: root/doc/zmq_getsockopt.txt
AgeCommit message (Collapse)Author
2012-02-16ZeroMQ renamed to CrossroadsMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-12-18Update email address in man pagesMartin Lucina
Signed-off-by: Martin Lucina <martin@lucina.net>
2011-11-16Documentation for IPv4ONLY option clarifiedMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-11-02ZMQ_IDENTITY option re-introducedMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-11-01LABELs removed from the documentationMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-10-06Default HWMs are set to 1000Martin Sustrik
This patch is meant to prevent users from running out of memory when using 0MQ in the default configuration. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-09-03Fixed doc to clarify how label parts workPieter Hintjens
Signed-off-by: Pieter Hintjens <ph@imatix.com> Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-08-08ZMQ_IPV4ONLY option addedSteven McCoy
At this point option exists, is documented and can be set, however, it has no effect. Signed-off-by: Steven McCoy <steven.mccoy@miru.hk> Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-07-18ZMQ_IDENTITY option removed from the documentationMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-07-11ZMQ_FILTER option removedMartin Sustrik
The filtering is now done depending on the socket type. SUB socket filters the messages (end-to-end filtering) while XSUB relies on upstream nodes to do (imprefect) filtering. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-06-20Fix errors in zmq_getsockopt(3) manpageMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-06-20LABEL flag added to the wire formatMartin Sustrik
So far there was no distinction between message parts used by 0MQ and message parts used by user. Now, the message parts used by 0MQ are marked as 'LABEL'. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-06-17Add sockopt ZMQ_RCVTIMEO/ZMQ_SNDTIMEO.Fabien Ninoles
- Add doc and tests - Add options and setup - Wait using poll/select Signed-off-by: Fabien Ninoles <fabien@tzone.org> Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-06-12ZMQ_FILTER socket option addedMartin Sustrik
This option is a performance tweak. In devices XSUB socket filters the messages just to send them to XPUB socket which filters them once more. Setting ZMQ_FILTER option to 0 allows to switch the filtering in XSUB socket off. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-05-15ZMQ_MULTICAST_HOPS socket option addedMartin Sustrik
Sets the time-to-live field in every multicast packet sent from the socket. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-04-11Fixed examplePieter Hintjens
Signed-off-by: Pieter Hintjens <ph@imatix.com>
2011-04-09Run-time checking for context & socket validity addedMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_HWM split into ZMQ_SNDHWM and ZMQ_RCVHWMMartin Sustrik
These new options allow to control the maximum size of the inbound and outbound message pipe separately. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_HWM type changed to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_RATE and ZMQ_RECOVERY_IVL types cahnged to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_EVENTS type changed to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_RCVMORE type changed to intMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_SNDBUF and ZMQ_RCVBUF type changed to intMartin Sustrik
This mimics POSIX specification. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24ZMQ_RECOVERY_IVL and ZMQ_RECOVERY_IVL_MSEC reconciledMartin Sustrik
There's only one option now -- ZMQ_RECOVRY_IVL -- and it's measured in milliseconds. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-24SWAP functionality removedMartin Sustrik
On-disk storage should be implemented in devices rather than in 0MQ core. 0MQ is a networking library and there's no point in storing network buffers on disk. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-23ZMQ_MCAST_LOOP removedMartin Sustrik
Multicast loopback is not a real multicast, rather a kernel-space simulation. Moreover, it tends to be rather unreliable and lossy. Removing the option will force users to use transports better suited for the job, such as inproc or ipc. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-03-02ZMQ_MAXMSGSIZE option addedMartin Sustrik
The new option allows user to guard against peers sending oversized messages. Connection to peer sending oversized message is dropped. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-02-24Minor patch to zmq_getsockopt(3) man pageMartin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2011-01-26ZMQ_RECONNECT_IVL_MAX socket option addedThijs Terlouw
It allows for exponential back-off strategy when reconnecting. Signed-off-by: Thijs Terlouw <thijsterlouw@gmail.com>
2010-12-09Added Recovery Interval in MillisecondsBob Beaty
For very high-speed message systems, the memory used for recovery can get to be very large. The corrent limitation on that reduction is the ZMQ_RECOVERY_IVL of 1 sec. I added in an additional option ZMQ_RECOVERY_IVL_MSEC, which is the Recovery Interval in milliseconds. If used, this will override the previous one, and allow you to set a sub-second recovery interval. If not set, the default behavior is to use ZMQ_RECOVERY_IVL. Signed-off-by: Bob Beaty <rbeaty@peak6.com>
2010-12-01Documentation updates for 2.1Martin Lucina
- Clarify ZMQ_LINGER, zmq_close (), zmq_term () relationship - New socket options - Clarify thread safety of sockets and migration between threads - Other minor and spelling fixes Signed-off-by: Martin Lucina <mato@kotelna.sk>
2010-11-04Fix documentation typosJacob Rideout
Signed-off-by: Jacob Rideout <jacob.rideout@returnpath.net>
2010-10-17Minor typo fixed in zmq_getsockopt(3) man page.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-17ZMQ_BACKLOG socket option added.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-17ZMQ_RECONNECT_IVL socket options added.Martin Sustrik
Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-10-16ZMQ_LINGER socket option added.Martin Sustrik
1. ZMQ_LINGER option can be set/get 2. options are part of own_t base class rather than being declared separately by individual objects 3. Linger option is propagated with "term" command so that the newest value of it is used rather than the stored old one. 4. Session sets the linger timer if needed and terminates as soon as it expires. 5. Corresponding documentation updated. Signed-off-by: Martin Sustrik <sustrik@250bpm.com>
2010-09-28ZMQ_TYPE socket option addedGonzalo Diethelm
2010-09-27ZMQ_FD and ZMQ_EVENTS documentation addedMartin Sustrik
2010-09-08EINTR returned from the blocking functionsMartin Sustrik
2010-09-04Revert "Various changes to documentation project:"Martin Lucina
This reverts commit 77a3c36ff1f11215229a4efdb821a3cb83a9d6fc.
2010-09-04Revert "Further cleanups on reference manual"Martin Lucina
This reverts commit 13f3481e127a6b2390e847af6b01ee88f1b4ae61. Conflicts: doc/zmq_device.txt doc/zmq_tcp.txt
2010-08-11Fixed (un)signed type errors in get/setsockopt manualPieter Hintjens
2010-08-08Added error checking (EFAULT) for null argumentsPieter Hintjens
* Fixed zmq_term, zmq_socket, zmq_close, zmq_setsockopt, * zmq_getsockopt, zmq_bind, zmq_connect, zmq_send, * zmq_recv, zmq_poll, zmq_device, zmq_stopwatch_stop * Updated Reference Manual for these methods
2010-08-04Further cleanups on reference manualPieter Hintjens
- fixed unwrapped text in new man pages - fixed over-long lines in older pages, where possible - removed reference to old standalong devices from index page - added refernce to new zmq_device[3] documented from index page - some minor spelling corrections
2010-08-04Various changes to documentation project:Pieter Hintjens
* Added documentation for zmq_deviced, which we're developing * Created consistent page footer in documentation template * Page footer notes doc authors and copyright statement
2010-06-15getsockopt documentation fixedMartin Sustrik
2010-06-03Documentation: Cosmetic changesMartin Lucina
2010-06-02Documentation: Flow control, zmq_socket(3)Martin Lucina
Mostly Flow control and additions to zmq_socket(3) Removed/changed lots of text regarding message queues More fixes for 2.0.7 changes
2010-06-01Documentation: zmq_term() and ETERM for 2.0.7Martin Lucina
2010-05-31Documentation updatesMartin Lucina
The option_value parameter for zmq_getsockopt is in and out.
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-26 18:39:18 +0000